9500 MXC User Manual
3DB 23063 ADAA - Rev 004 July 2007 Vol. IV-2-29
Procedure
1. Establish a V.24 connection to the Node/Terminal.
2. Go to the
Configuration > Networking screen to view IP address settings.
For Single IP Addressing, the displayed IP address is the address required.
For Interface Addressing (Advanced), the required IP address is the address
of the Ethernet Port.
3. Log-off and reconnect your PC for an Ethernet connection
4. Enter the IP address from step 2, and click Connect.
Next Step
Table 2-3 directs you to relevant sections of the 9500 MXC CT volume.
Table 2-3. Reference Topics
For a description of Single IP and Interface Addressing refer to the topic, 9500
MXC Address and Routing Options on page 10-2.
9500 MXC CT Topic Reference
System Summary screen System Summary on page 15-2, Volume IV
Screen navigation, logos, and icons 9500 MXC CT Screens on page 1-1, Volume IV
Installation and Configuration Procedure Overview for a New Installation on
page 3-7, Volume III
Diagnostics Volume IV, Chapter 15.
To Next Page
Loading...
