Alcatel-Lucent 9500 MXC - DAC 16 X, DAC 4 X and IDU E1;Ds1 Trib Configuration

Chapter 7. Node and Terminal Plug-ins
Vol. IV-7-28 Alcatel-Lucent
DAC 16x, DAC 4x and IDU E1/DS1Trib Configuration
For 9500 MXC Node, this section describes DATA > DAC 16x and DAC 4x
tributary configuration.
For 9500 MXC Terminal, this section describes DATA > DAC E1/DS1 tributary
configuration. Functionality is identical to DAC 16x or DAC 4x.
DAC 16x and DAC 4x Screen
Figure 7-7 shows a typical DAC 16x screen.
Figure 7-7. Typical DAC 16x Plug-in
Item Description
1 Select E1 or DS1.
2 Link to circuits screen to select backplane bus type. Bus type must be set to
match the E1 or DS1 selection.
1
2
3
4
5
6
7
8