9500 MXC User Manual
3DB 23063 ADAA - Rev 004 July 2007 Vol. IV-15-39
DAC GE Performance
The DAC GE performance screen is similar in appearance and operation to the
DAC ES screen. See DAC ES and IDU ES Performance on page 15-33.
DAC GE Performance Screen Navigation
Select the DAC GE from the Module menu.
On opening, the Performance Statistics lines are empty. To enable, click the Start
All button. Data aggregates from this point forward for as long as CT is logged
on, or until the Stop All or Clear All buttons are selected.
Error events are shown with red text.
Viewing other CT screens does not affect the aggregation of performance
statistics.
The Stop All button terminates the data aggregation, but leaves for viewing the
data collected / displayed to that point.
The Clear All button clears all data.
If the Node is powered off, reset or the DAC GE withdrawn during data capture,
a warning is displayed advising that collected data has been interrupted.
Table 15-4 lists the available port and channel based RMON data.
Table 15-4. Description of DAC GE RMON Performance Statistics
Switch Stats Out 1023
Octets
The total number of frames transmitted with a length of
between 512 and 1023 octets inclusive, including those with
errors.
Switch Stats Out Max
Octets
Total frames transmitted with a length of between 1024 and
1522 octets inclusive, including those with errors.
Switch Stats Collisions Total number of collisions during the frame transmission.
Statistic Description
Name Description
UcastPkts Number of Unicast frames received.
BroadcastPkts Number of broadcast frames received.
(InBroadcasts)
MulticastPkts Number of multicast frames received.
(InMulticasts)
To Next Page
Loading...
