Chapter 2. Setting Up 9500 MXC CT
Vol. IV-2-12 Alcatel-Lucent
Setting Up a V.24 Connection via a DB-9 Serial COM Port
These procedures apply to PCs fitted with a serial COM port.
Procedures are provided for Windows XP, 2000 and 98:
• For Windows 2000 and Windows 98 the process requires:
• Installing 9500 MXC Modem Driver for Serial COM port: Windows 2000
& 98 and;
• Installing Dial-up Connection for Serial COM port: Windows 2000 & 98.
• For Windows XP two procedures are detailed:
• A procedure similar to that for Windows 2000 / 98 using the modem driver.
Refer to Installing 9500 MXC Modem Driver for Serial COM port:
Windows 2000 & 98, and subsequently to Installing a Dial-up Connection
for Serial COM Port: Windows XP
• A computer-to-computer comms cable procedure that does not require
installation of the modem driver. Refer to Installing a COM Port
Communications Cable Connection: Windows XP.
Installing 9500 MXC Modem Driver for Serial COM port: Windows 2000 & 98
To install the V.24/RS-232 modem:
1. From the PC control panel, select
Phone and Modem Options > Modems >
Add.
The Install Modem Wizard window is displayed.
2. Click
Next.
3. Select
Don't detect my modem; I will select it from a list and click Next.
4. Select
Have Disk and browse to the 9500 MXC Installation Kit CD.
5. Select the
9500 MXC V.24 Modem Driver.inf file, and click Open.
6. Select
9500 MXC V.24 Modem [38400bps] and click Next.
7. Select a COM port and click
Next.
8. If a Digital Signature Not Found screen is displayed, click
Yes.
9. To complete the installation, click
Finish.
10. Click
OK.
To Next Page
Loading...