9500 MXC User Manual
3DB 23063 ADAA - Rev 004 July 2007 Vol. III-2-25
• Performance comparable to that of the recommended external suppressors.
Complies with IEC 61000-4-5, Class 5 and GR-10890-CORE 4.11, Type 1, 3,
5 & 6. The suppressor supports a multi-strike capability.
• More consistent ODU reliability with guaranteed presence of a protection
device.
• Reduced installation accessory costs. (There is no cost increase to the
ODU300hp).
• Reduced installation time.
ODUs fitted with the internal suppressor are identified with a label. There is
no change to ODU part numbers.
Figure 2-15. Identification Label
If an ODU does not have such a label, an external surge suppressor must be
fitted.
Lightning Surge Suppressor Kit
The external suppressor kit includes connectors, ground wire, ground clamp,
waterproofing tape, and a support bracket for use at an ODU installation. Kits are
available for one or two suppressors.
To Next Page
Loading...
