3DB 23063 ADAA - Rev 004 July 2007 Vol. I-1-1
Health and Safety
This volume includes the following health and safety information:
• General Health and Safety
• Operator Health and Safety
• General Hazards
All personnel must comply with the relevant health and safety practices when
working on or around the 9500 MXC radio equipment.
The 9500 MXC has been designed to meet relevant US and European health and
safety standards as outlined in IEC Publication 60950.
Local safety regulations must be used if mandatory. Safety instructions in this Volume
should be used in addition to the local safety regulations. In the case of conflict between
safety instructions stated herein and those indicated in local regulations, mandatory local
norms will prevail. Should not local regulations be mandatory, then safety norms herein
will prevail.
To Next Page
Loading...
