Chapter 7. Node and Terminal Plug-ins
Vol. IV-7-56 Alcatel-Lucent
Table 7-7. Priority Mapping table
• To change mapping assignments, click and select on the relevant Internal
Priority sub-menus.
• To return mapping to default, click Set Defaults.
11. To commit the configuration, click
Send.
Next Step: Go to the Circuits screen to configure circuit cross-connects. Refer to
Procedure for Configuring Circuits - Traffic on page 9-9, Volume IV, Chapter 9.
Priority Level VLAN 802.1p DiffServ Value
High 6, 7 48 - 63
Medium high 4, 5 32 - 47
Medium low 2, 3 16 - 31
Low 0, 1 0 - 15
To Next Page
Loading...
