9500 MXC User Manual
3DB 23063 ADAA - Rev 004 July 2007 Vol. IV-15-57
Figure 15-20. DAC 16xE1 System Controls Screen
Item Description
1 Looped icon confirms that a line facing loopback is applied to trib 1.
2 Looped icon confirms that a radio facing loopback is applied to trib 3.
3 The highlighted trib has PRBS enabled.
Trib names are set from the Plug-ins screen.
4 G.821 Data from the PRBS test, as received back via a local or remote
loopback, or from a PRBS test sent from the remote-end DAC. Mouse- over to
view the PRBS graphic shown.
5 An ‘On’ selection of loopback or AIS brings up Safety Timer options.
1
2
3
4
5
To Next Page
Loading...
