9500 MXC User Manual
3DB 23063 ADAA - Rev 004 July 2007 Vol. VI-B-25
Probable Cause
Equipment malfunction.
Recommended Actions
Confirm that transmitter power has been muted using the Detected Tx Power
measurement in the CT Performance screen. Replace the ODU.
Additional Information
This alarm will mute the transmitter to prevent spurious transmission.
The Tx synthesiser controls the link transmit frequency.
Transceiver TX Failure
Failed transceiver module. This is a critical alarm.
Probable Cause
Equipment malfunction.
Recommended Actions
Confirm loss of transmitter using Detected Tx Power in the CT Performance
screen. Replace the ODU.
TX IF Synthesiser Not Locked
Transmitter IF not on frequency. This is a critical alarm.
Probable Cause
Equipment malfunction.
Recommended Actions
Confirm that transmitter power has been muted using the Detected Tx Power
measurement in the CT Performance screen. Replace the ODU.
Additional Information
This alarm will mute the transmitter to prevent spurious transmission.
Modulator Not Locked
Modulator is not locked. This is a critical alarm.
To Next Page
Loading...
