EasyManua.ls Logo

Alcatel-Lucent 9500 MXC - Page 754

Alcatel-Lucent 9500 MXC
916 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Vol. VI-B-28 Alcatel-Lucent
Recommended Actions
Replace the ODU.
Additional Information
Alarm indicates the ODU cable Rx IF frequency is not locked. It is possible for
traffic to pass over a link with IF synthesisers not locked, but it will be errored
with a high BER. This may be checked using local Performance screen
parameters.
Demodulator Not Locked
Demodulator cannot synchronise to Rx data. This is a critical alarm.
Probable Cause
Path loss, or equipment malfunction.
Recommended Actions
Check other local Link (RAC/Radio) alarms.
1. A path or remote Tx failure is indicated by the absence of upstream Rx
alarms.
Possible upstream alarms include Rx Synthesiser and Rx IF Synthesiser
alarms.
2. A component failure is indicated by the additional presence of:
One or more of the upstream alarms indicated in 1) above, or alarms
indicating a loss of communications with the ODU, such as an ODU Cable
Unplugged alarm.
3. A remote Tx failure is indicated in the absence of upstream Rx alarms, and
weather conditions not supporting reasons for a full path fade.
Additional Information
Demodulator unlocked is the primary receive-signal path and equipment alarm.
Always check upstream, towards the ODU, path and remote radio, to ascertain
the cause.
The demodulator is located in the RAC.
An unlocked demodulator will activate downstream path failure and path
warning alarms.
Tuner Not Locked
Receive path tuner has failed. This is a critical alarm.

Table of Contents

Related product manuals