Arkray ADAMS A1c User Manual

Chapter 4 Maintenance
HA-8190V 4-28
4 Turn off the power.
• The message “Tube washing ended. Turn off power.” will appear when tube washing is complete.
a Check that the washing rack is not moving and remove the rack from the rack unloading side of the sampler.
b Press the standby switch to turn off the power.
NOTE:
If the timer was set by touching , do not turn off the power by pressing the standby switch in step b.
Turning off the power with the standby switch will cancel the timer.
REFERENCE:
The washing solution for tubes will remain in the instrument and will be drained the next time the instrument starts
up.
NOTE:
After turning off the power, let the instrument sit as is for one night (8 hours or more) for the maximum cleaning
effect.
Timer

Arkray ADAMS A1c Specifications

General

Brand	Arkray
Model	ADAMS A1c
Category	Measuring Instruments
Language	English