SIP User's Manual 152 Document #: LTRT-83310
Mediant 600 & Mediant 1000
12.3 Configuring RTP/RTCP Settings
The RTP/RTCP Settings page configures the Real-Time Transport Protocol (RTP) and
Real-Time Transport (RTP) Control Protocol (RTCP) parameters. For a detailed description
of the parameters appearing on this page, refer to 'Configuration Parameters Reference' on
page 541.
To configure the RTP/RTCP parameters:
1. Open the RTP/RTCP Settings page (Configuration tab > VoIP menu > Media
submenu > RTP/RTCP Settings).
2. Configure the parameters as required.
3. Click Submit to apply your changes.
4. To save the changes to flash memory, refer to 'Saving Configuration' on page 482.
To Next Page
Loading...
