AudioCodes Mediant 600 - Configuring Voice Mail Parameters

SIP User's Manual 318 Document #: LTRT-83310
Mediant 600 & Mediant 1000
18.5.4 Configuring Voice Mail Parameters
The Voice Mail Settings page allows you to configure the voice mail parameters. For a
description of these parameters, see 'Configuration Parameters Reference' on page 541.
Notes:
• The Voice Mail Settings page is available only for FXO and CAS
interfaces.
• For more information on configuring voice mail, refer to the CPE
Configuration Guide for Voice Mail User's Manual.
 To configure the Voice Mail parameters:
1. Open the Voice Mail Settings page (Configuration tab > VoIP menu > GW and IP to
IP submenu > Advanced Applications submenu > Voice Mail Settings).
2. Configure the parameters as required.
3. Click Submit to apply your changes.
4. To save the changes to flash memory, see 'Saving Configuration' on page 482.