AudioCodes Mediant 600 - Viewing Registration Status

Version 6.4 521 March 2012
SIP User's Manual 28. VoIP Status
Table 28-3: Call Routing Status Parameters
Parameter Description
Call-Routing Method
 Proxy/GK = Proxy server is used to route calls.
 Routing Table = The Outbound IP Routing Table is used to route
calls.
IP Address
 Not Used = Proxy server isn't defined.
 IP address and FQDN (if exists) of the Proxy server with which the
device currently operates.
State
 N/A = Proxy server isn't defined.
 OK = Communication with the Proxy server is in order.
 Fail = No response from any of the defined Proxies.
28.6 Viewing Registration Status
The Registration Status page displays whether the device, its endpoints, SIP Accounts,
and BRI endpoints are registered to a SIP Registrar/Proxy server.
 To view Registration status:

Open the Registration Status page (Status & Diagnostics tab > VoIP Status menu >
Registration Status).
Figure 28-5: Registration Status Page

Registered Per Gateway:
• "YES" = registration is per device
• "NO"= registration is not per device

Ports Registration Status:
• "REGISTERED" = channel is registered
• "NOT REGISTERED" = channel not registered

Accounts Registration Status: registration status based on the Accounts table
(configured in 'Configuring Account Table' on page 225):
• Group Type: type of served group - Trunk Group or IP Group