AudioCodes Mediant 600 - Configuring Digital Gateway Parameters

Version 6.4 237 March 2012
SIP User's Manual 18. GW and IP to IP
18.1.4 Configuring Digital Gateway Parameters
The Digital Gateway Parameters page allows you to configure miscellaneous digital
parameters. For a description of these parameters, see 'Configuration Parameters
Reference' on page 541.
 To configure the digital gateway parameters:
1. Open the Digital Gateway Parameters page (Configuration tab > VoIP menu > GW
and IP to IP submenu > Digital Gateway submenu > Digital Gateway Parameters).
Figure 18-3: Digital Gateway Parameters Page
2. Configure the parameters as required.
3. Click Submit to apply your changes.
4. To save the changes to flash memory, see 'Saving Configuration' on page 482.