AudioCodes Mediant 600 - Using the Home Page

Version 6.4 59 March 2012
SIP User's Manual 3. Web-Based Management
3.2 Using the Home Page
By default, the Home page is displayed when you access the device's Web interface. The
Home page provides you with a graphical display of the device's front panel, displaying
color-coded status icons for monitoring the functioning of the device. The Home page also
displays general device information (in the 'General Information' pane) such as the device's
IP address and firmware version.
 To access the Home page:

On the toolbar, click the Home icon.
Figure 3-31: Home Page of Mediant 600
Figure 3-32: Home Page of Mediant 1000
Note: The displayed number and type of telephony interfaces depends on the
device's hardware configuration.
In addition to the color-coded status information depicted on the graphical display of the
device (as described in the subsequent table), the Home page displays various read-only
information in the General Information pane:

IP Address: IP address of the device

Subnet Mask: subnet mask address of the device

Default Gateway Address: default gateway used by the device

Digital Port Number: number of digital PRI ports (appears only if the device houses a
DIGITAL module)

BRI Port Number: number of BRI ports (appears only if the device houses a BRI
module)

Analog Port Number: number of analog (FXS / FXO) ports (appears only if the