Version 6.4 529 March 2012
SIP User's Manual 29. Reporting Information to External Party
"GWAPP_CALL_ID_IN_USE"
"GWAPP_NO_CALL_SUSPENDED"
"GWAPP_CALL_HAVING_CALL_ID_CLEARED"
"GWAPP_INCOMPATIBLE_DESTINATION"
"GWAPP_INVALID_TRANSIT_NETWORK_SELECTION"
"GWAPP_INVALID_MESSAGE_UNSPECIFIED"
"GWAPP_NOT_CUG_MEMBER"
"GWAPP_CUG_NON_EXISTENT"
"GWAPP_MANDATORY_IE_MISSING"
"GWAPP_MESSAGE_TYPE_NON_EXISTENT"
"GWAPP_MESSAGE_STATE_INCONSISTENCY"
"GWAPP_NON_EXISTENT_IE"
"GWAPP_INVALID_IE_CONTENT"
"GWAPP_MESSAGE_NOT_COMPATIBLE"
"GWAPP_RECOVERY_ON_TIMER_EXPIRY"
"GWAPP_PROTOCOL_ERROR_UNSPECIFIED"
"GWAPP_INTERWORKING_UNSPECIFIED"
"GWAPP_UKNOWN_ERROR"
"RELEASE_BECAUSE_HELD_TIMEOUT"
29.1.3 Supported RADIUS Attributes
The following table provides descriptions on the RADIUS attributes included in the
communication packets transmitted between the device and a RADIUS Server.
Table 29-2: Supported RADIUS Attributes
Attribute
Number
Attribute
Name
VSA
No.
Purpose
Value
Format
Example AAA
1
Request Attributes
1 User-Name
Account number or calling
party number or blank
String
up to 15
digits
long
5421385747
Start Acc
Stop Acc
4
NAS-IP-
Address
IP address of the
requesting device
Numeric 192.168.14.43
Start Acc
Stop Acc
6 Service-Type Type of service requested Numeric 1: login
Start Acc
Stop Acc
26
H323-
Incoming-
Conf-Id
1 SIP call identifier
Up to 32
octets
Start Acc
Stop Acc
26
H323-
Remote-
Address
23
IP address of the remote
gateway
Numeric
Stop Acc
26
H323-Conf-
ID
24 H.323/SIP call identifier
Up to 32
octets
Start Acc
Stop Acc
26
H323-Setup-
25
Setup time in NTP format
String
Start Acc
To Next Page
Loading...
