AudioCodes Mediant 600 - Related Documentation

SIP User's Manual 16 Document #: LTRT-83310
Mediant 600 & Mediant 1000
Related Documentation
Manual Name
SIP CPE Release Notes
Product Reference Manual for SIP CPE Devices
Mediant 600 Hardware Installation Manual
Mediant 1000 Hardware Installation Manual
CPE Configuration Guide for IP Voice Mail
Note:
The scope of this document does not fully cover security aspects for
deploying the device in your environment. Security measures should be done
in accordance with your organization’s security policies. For basic security
guidelines, you can refer to AudioCodes Recommended Security Guidelines
document.
Note: Throughout this manual, unless otherwise specified, the term device refers to
the Mediant 600 and Mediant 1000.
Note: Before configuring the device, ensure that it is installed correctly as instructed
in the Hardware Installation Manual.
Note: The terms IP-to-Tel and Tel-to-IP refer to the direction of the call relative to
the device. IP-to-Tel refers to calls received from the IP network and destined
to the PSTN/PBX (i.e., telephone connected directly or indirectly to the
device); Tel-to-IP refers to calls received from the PSTN/PBX and destined
for the IP network.
Notes:
• FXO (Foreign Exchange Office) is the interface replacing the analog
telephone and connects to a Public Switched Telephone Network (PSTN)
line from the Central Office (CO) or to a Private Branch Exchange (PBX).
The FXO is designed to receive line voltage and ringing current, supplied
from the CO or the PBX (just like an analog telephone). An FXO VoIP
device interfaces between the CO/PBX line and the Internet.
• FXS (Foreign Exchange Station) is the interface replacing the Exchange
(i.e., the CO or the PBX) and connects to analog telephones, dial-up
modems, and fax machines. The FXS is designed to supply line voltage
and ringing current to these telephone devices. An FXS VoIP device
interfaces between the analog telephone devices and the Internet.