Version 6.4 517 March 2012
SIP User's Manual 28. VoIP Status
28 VoIP Status
This section describes how to view the following VoIP status and statistics:
IP network interface - see 'Viewing Active IP Interfaces' on page 517
Performance - see 'Viewing Performance Statistics' on page 517
IP-to-Tel calls - see 'Viewing Call Counters' on page 518
Tel-to-IP calls - see 'Viewing Call Counters' on page 518
SAS registered users - see Viewing SAS/SBC Registered Users on page 520
Call routing - see 'Viewing Call Routing Status' on page 520
Registration - see Viewing Registration Status on page 521
IP connectivity - see 'Viewing IP Connectivity' on page 522
28.1 Viewing Active IP Interfaces
The IP Interface Status page displays the device's active IP interfaces, which are
configured in the Multiple Interface Table page (see 'Configuring IP Interface Settings' on
page 102).
To view the Active IP Interfaces page:
Open the IP Interface Status page (Status & Diagnostics tab > VoIP Status menu >
IP Interface Status).
28.2 Viewing Performance Statistics
The Basic Statistics page provides read-only, device performance statistics. This page is
refreshed every 60 seconds. The duration that the currently displayed statistics has been
collected is displayed above the statistics table.
To view performance statistics:
Open the Basic Statistics page (Status & Diagnostics tab > VoIP Status menu >
Performance Statistics).
Figure 28-1: Basic Statistics Page
To reset the performance statistics to zero, click the Reset Statistics button.
To Next Page
Loading...
