EasyManua.ls Logo

AudioCodes Mediant 600 - Announcement Call Flow Example

AudioCodes Mediant 600
844 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Version 6.4 447 March 2012
SIP User's Manual 20. Configuring the IP Media Parameters
Problem Probable Cause Corrective Action
Remote file system is not being mounted and
the Syslog displays the following:
'NFS mount failed, reason=permission
denied IP=<ip> path=<dir>
state=waitForMountReply numRetries=0;'.
The NFS server is not
configured to accept
requests on ports outside
of the range 0...1024.
On a Linux NFS server,
use the insecure option in
the /etc/exports file (see
Linux-Based NFS Servers
on page 445).
All recording sessions are aborted at the
same time with these Syslogs:
'NFS request aborted, reqid=209 cid=-1
error=writeReplyError reqtype=writeFile
state=writeWait [File:NfsStateMachine.cpp
…]'
'NFS request aborted, reqid=186 cid=-1
error=writeReplyError reqtype=writeFile
state=writeWait [File:NfsStateMachine.cpp
…]'
The file system on the
NFS server is full.
Remove unwanted files
on the file system.
20.1.2.4 Announcement Call Flow Example
The call flow, shown in the following figure, describes SIP messages exchanged between
the device (10.33.24.1) and a SIP client (10.33.2.40) requesting to play local
announcement #1 (10.8.25.17) using AudioCodes proprietary method.
1. SIP MESSAGE 1: 10.33.2.40:5060 -> 10.33.24.1:5060

Table of Contents

Other manuals for AudioCodes Mediant 600

Related product manuals