AudioCodes Mediant 600 - Accessing the Web Interface

SIP User's Manual 34 Document #: LTRT-83310
Mediant 600 & Mediant 1000
3.1.2 Accessing the Web Interface
The procedure below describes how to access the Web interface.
When initially accessing the Web interface, use
Note: For assigning an IP address to the device, refer to the Installation Manual.
 To access the Web interface:
1. Open a standard Web browser (see 'Computer Requirements' on page 33).
2. In the Web browser, specify the IP address of the device (e.g., http://10.1.10.10); the
Web interface's Login window appears, as shown below:
Figure 3-1: Login Screen
3. In the 'User Name' and 'Password' fields, enter the case-sensitive, user name and
password respectively.
Notes:
• The default user name and password is "Admin". To change the login
user name and password, see 'Configuring the Web User Accounts' on
page 66.
• If you want the Web browser to remember your password, select the
'Remember my credentials' check box. The next time you log in to the
Web interface, instead of entering your credentials as described in Step 3
above, all you need to do is to click OK twice in succession.
4. Click OK; the Web interface is accessed, displaying the Home page (for a detailed
description of the Home page, see 'Using the Home Page' on page 59).