SIP User's Manual 160 Document #: LTRT-83310
Mediant 600 & Mediant 1000
12.4 Configuring IP Media Settings
The IPMedia Settings page allows you to configure the IP media parameters. For a
detailed description of the parameters appearing on this page, see 'Configuration
Parameters Reference' on page 541.
To configure the IP media parameters:
1. Open the IPMedia Settings page (Configuration tab > VoIP menu > Media submenu
> IPMedia Settings).
2. Configure the parameters as required.
3. Click Submit to apply your changes.
4. To save the changes to flash memory, see 'Saving Configuration' on page 482.
12.4.1 Answer Machine Detector (AMD)
The device provides answering machine detection (AMD) capabilities that can detect for
example, if a human voice or an answering machine is answering the call. AMD is useful
for automatic dialing applications.
The device supports up to four AMD parameter suites, where each parameter suite defines
the AMD sensitivity levels of detection. The detection sensitivity levels can range from 0 to
15, depending on parameter suite. The level is selected using the AMDSensitivityLevel
parameter. The Parameter Suite(s) can be loaded to the device in the Web interface as an
auxiliary file (see 'Loading Auxiliary Files' on page 483) or loaded remotely through the ini
file (using the AMDSensitivityFileName and AMDSensitivityFileUrl parameters). In addition,
To Next Page
Loading...
