SIP User's Manual 72 Document #: LTRT-83310
Mediant 600 & Mediant 1000
3.7 Configuring RADIUS Settings
The RADIUS Settings page is used for configuring the Remote Authentication Dial In User
Service (RADIUS) accounting parameters. For a description of these parameters, see
'Configuration Parameters Reference' on page 541.
To configure RADIUS:
1. Open the RADIUS Settings page (Configuration tab > System menu > Management
submenu > RADIUS Settings).
Figure 3-42: RADIUS Parameters Page
2. Configure the parameters as required.
3. Click Submit to apply your changes.
4. To save the changes to flash memory, see 'Saving Configuration' on page 482.
To Next Page
Loading...
