AudioCodes Mediant 600 - DNS Parameters; A.1.7 DNS Parameters

Version 6.4 551 March 2012
SIP User's Manual A. Configuration Parameters Reference
Parameter Description
0).
 To avoid terminating current calls, a row must not be deleted or
modified while the device is currently accessing files on the remote
NFS file system.
 The combination of host/IP and Root Path must be unique for each
index in the table. For example, the table must include only one index
entry with a Host/IP of '192.168.1.1' and Root Path of '/audio'.
 This parameter is applicable only if VLANs are enabled or Multiple
IPs is configured.
 For a detailed description of the table's parameters and to configure
NFS using the Web interface, see 'Configuring NFS Settings' on page
127.
 For a description of configuring ini file table parameters, see
'Configuring ini File Table Parameters' on page 84.
A.1.7 DNS Parameters
The Domain name System (DNS) parameters are described in the table below.
Table A-7: DNS Parameters
Parameter Description
Internal DNS Table
Web: Internal DNS Table
EMS: DNS Information
[DNS2IP]
This parameter table defines the internal DNS table for resolving host
names into IP addresses. Up to four different IP addresses (in dotted-
decimal notation) can be assigned to a host name.
The format of this parameter is as follows:
[Dns2Ip]
FORMAT Dns2Ip_Index = Dns2Ip_DomainName,
Dns2Ip_FirstIpAddress, Dns2Ip_SecondIpAddress,
Dns2Ip_ThirdIpAddress, Dns2Ip_FourthIpAddress;
[\Dns2Ip]
For example:
Dns2Ip 0 = DnsName, 1.1.1.1, 2.2.2.2, 3.3.3.3, 4.4.4.4;
Notes:
 This parameter can include up to 20 indices.
 If the internal DNS table is used, the device first attempts to resolve a
domain name using this table. If the domain name isn't found, the
device performs a DNS resolution using an external DNS server.
 To configure the internal DNS table using the Web interface and for a
description of the parameters in this ini file table parameter, see
'Configuring the Internal DNS Table' on page 123.
 For configuring ini file table parameters, see 'Configuring ini File
Table Parameters' on page 84.
Internal SRV Table
Web: Internal SRV Table
EMS: DNS Information
[SRV2IP]
This parameter table defines the internal SRV table for resolving host
names into DNS A-Records. Three different A-Records can be assigned
to a host name. Each A-Record contains the host name, priority, weight,
and port. The format of this parameter is as follows:
[SRV2IP]