Version 6.4 765 March 2012
SIP User's Manual A. Configuration Parameters Reference
A.12.19 Least Cost Routing Parameters
The Least Cost Routing parameters are described in the table below.
Table A-73: LCR Parameters
Parameter Description
Web: Routing Rule Groups
Table
[RoutingRuleGroups]
This parameter table enables the LCR feature and configures the
average call duration and default call cost. The default call cost
determines whether routing rules that are not configured with a Cost
Group are considered as a higher or lower cost route compared to
other matching routing rules that are assigned Cost Groups.
[ RoutingRuleGroups ]
FORMAT RoutingRuleGroups_Index =
RoutingRuleGroups_LCREnable,
RoutingRuleGroups_LCRAverageCallLength,
RoutingRuleGroups_LCRDefaultCost;
[ \RoutingRuleGroups ]
Web: Cost Group Table
[CostGroupTable]
This parameter table configures the Cost Groups for LCR, where each
Cost Group is configured with a name, fixed call connection charge,
and a call rate (charge per minute).
[ CostGroupTable ]
FORMAT CostGroupTable_Index =
CostGroupTable_CostGroupName,
CostGroupTable_DefaultConnectionCost,
CostGroupTable_DefaultMinuteCost;
[ \CostGroupTable ]
For example: CostGroupTable 2 = "Local Calls", 2, 1;
Web: Cost Group > Time
Band Table
[CostGroupTimebands]
This parameter table configures time bands and associates them with
Cost Groups
[CostGroupTimebands]
FORMAT CostGroupTimebands_TimebandIndex =
CostGroupTimebands_StartTime, CostGroupTimebands_EndTime,
CostGroupTimebands_ConnectionCost,
CostGroupTimebands_MinuteCost;
[\CostGroupTimebands]
A.13 Standalone Survivability Parameters
The Stand-alone Survivability (SAS) parameters are described in the table below.
Table A-74: SAS Parameters
Parameter Description
Web: Enable SAS
EMS: Enable
[EnableSAS]
Enables the Stand-Alone Survivability (SAS) feature.
[0] Disable Disabled (default)
[1] Enable = SAS is enabled
When enabled, the device receives the registration requests
from different SIP entities in the local network and then forwards
them to the defined proxy. If the connection to the proxy fails
('Emergency Mode'), the device serves as a proxy by allowing
To Next Page
Loading...
