AudioCodes Mediant 600 - Page 764

SIP User's Manual 764 Document #: LTRT-83310
Mediant 600 & Mediant 1000
Parameter Description
For example: LDAPBindDN = "CN=Search
user,OU=Labs,DC=OCSR2,DC=local"
Web: LDAP Search Dn
[LDAPSearchDN]
Defines the search DN for LDAP search requests. This is
the top DN of the subtree where the search is performed.
This parameter is mandatory for the search.
For example: LDAPSearchHDN = "CN=Search
user,OU=Labs,DC=OCSR2,DC=local"
Web: LDAP Server Max Respond
Time
[LDAPServerMaxRespondTime]
Defines the time (in seconds) that the device waits for LDAP
server responses.
The valid value range is 0 to 86400. The default is 3000.
[LDAPDebugMode]
Determines whether to enable the LDAP task debug
messages. This is used for providing debug information
regarding LDAP tasks.
The valid value range is 0 to 3. The default is 0.
Web: MS LDAP OCS Number attribute
name
[MSLDAPOCSNumAttributeName]
Defines the name of the attribute that represents the user
OCS number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default
is "msRTCSIP-PrimaryUserAddress".
Web: MS LDAP PBX Number attribute
name
[MSLDAPPBXNumAttributeName]
Defines the name of the attribute that represents the user
PBX number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default
is "telephoneNumber".
Web: MS LDAP MOBILE Number
attribute name
[MSLDAPMobileNumAttributeName]
Defines the name of the attribute that represents the user
Mobile number in the Microsoft AD database.
The valid value is a string of up to 49 characters. The default
is "mobile".
[MSLDAPPrivateNumAttributeName]
Defines the name of the attribute that represents the user's
private number in the AD. If this value equals the value of
the MSLDAPPrimaryKey or MSLDAPSecondaryKey
parameter, then the <device> queries the AD for the
destination number in this private attribute name; otherwise,
this parameter is not used as a search key.
The default value is "msRTCSIP-PrivateLine".
[MSLDAPPrimaryKey]
Defines the name of the attribute used as a query search
key for the destination number in the AD. This is used
instead of the "PBX" attribute name (configured by the
MSLDAPPBXNumAttributeName parameter).
The default value is not configured.
[MSLDAPSecondaryKey]
Defines the name of the attribute used as the second query
search key for the destination number in the AD, if the
primary search key or PBX search is not found.