Version 6.4 479 March 2012
SIP User's Manual 22. Basic Maintenance
22 Basic Maintenance
The Maintenance Actions page allows you to perform the following:
Reset the device - see 'Resetting the Device' on page 479
Lock and unlock the device - see 'Locking and Unlocking the Device' on page 481
Save configuration to the device's flash memory - see 'Saving Configuration' on page
482
To access the Maintenance Actions page, do one of the following:
On the toolbar, click the Device Actions button, and then from the drop-down menu,
choose Reset.
On the Navigation bar, click the Maintenance tab, and then in the Navigation tree,
select the Maintenance menu and choose Maintenance Actions.
Figure 22-1: Maintenance Actions Page
22.1 Resetting the Device
The Maintenance Actions page allows you to remotely reset the device. In addition, before
resetting the device, you can choose the following options:
Save the device's current configuration to the device's flash memory (non-volatile).
Perform a graceful shutdown, i.e., device reset starts only after a user-defined time
(i.e., timeout) or after no more active traffic exists (the earliest thereof).
Notes:
• Throughout the Web interface, parameters preceded by the lightning
symbol are not applied on-the-fly and require that you reset the device for
them to take effect.
• When you modify parameters that require a device reset, once you click
the Submit button in the relevant page, the toolbar displays "Reset" (see
'Toolbar' on page 36) to indicate that a device reset is required.
• After you reset the device, the Web GUI is displayed in Basic view (see
'Displaying Navigation Tree in Basic and Full View' on page 38).
To Next Page
Loading...
