AudioCodes Mediant 600 - Using the FXS Voice Menu Guidance

SIP User's Manual 28 Document #: LTRT-83310
Mediant 600 & Mediant 1000
2.4 Using the FXS Voice Menu Guidance
You can assign an IP address that suits your networking scheme using a standard touch-
tone telephone connected to one of the FXS ports. The voice menu can also be used to
query and modify basic configuration parameters.
Notes:
• Assigning an IP address using the voice menu is applicable only when
the device is installed with an FXS module.
• If you want to disable the voice menu, do one of the following:
- Set the VoiceMenuPassword parameter to 'disable'.
- Change the Web login password for the Admin user from its default
value (i.e., "Admin") to any other value, and then reset the device.
 To assign an IP address using the voice menu:
1. Connect a telephone to one of the FXS ports.
2. Lift the handset and dial ***12345 (three stars followed by the digits 1, 2, 3, 4, and 5).
3. Wait for the 'configuration menu' voice prompt to be played.
4. To change the IP address:
a. Press 1 followed by the pound key (#); the current IP address of the device is
played.
b. Press the # key.
c. Dial the new IP address, using the star (*) key instead of periods (.), e.g.,
192*168*0*4, and then press # to finish.
d. Review the new IP address, and then press 1 to save.
5. To change the subnet mask:
a. Press 2 followed by the # key; the current subnet mask of the device is played.
b. Press the # key.
c. Dial the new subnet mask (e.g., 255*255*0*0), and then press # to finish.
d. Review the new subnet mask, and then press 1 to save.
6. To change the Default Gateway IP address:
a. Press 3 followed by the # key; the current Default Gateway address is played.
b. Press the # key.
c. Dial the new Default Gateway address (e.g., 192*168*0*1), and then press # to
finish.
d. Review the new Default Gateway address, and then press 1 to save.
7. Hang up (on-hook) the handset.
Alternatively, initial configuration may be performed using an HTTP server, as discussed in
the Product Reference Manual ('Automatic Update Facility'). The Voice Menu may be used
to specify the configuration URL.