AudioCodes Mediant 600 - Toolbar Description

SIP User's Manual 36 Document #: LTRT-83310
Mediant 600 & Mediant 1000
3.1.4 Toolbar Description
The toolbar provides frequently required command buttons, as described in the table
below:
Table 3-1: Description of Toolbar Buttons
Icon Button
Name
Description
Submit
Applies parameter settings to the device (see 'Saving Configuration'
on page 482).
Note: This icon is grayed out when not applicable to the currently
opened page.
Burn
Saves parameter settings to flash memory (see 'Saving
Configuration' on page 482).
Device
Actions
Opens a drop-down menu list with frequently needed commands:
 Load Configuration File: opens the Configuration File page for
loading an ini file (see 'Backing Up and Loading Configuration File'
on page 503).
 Save Configuration File: opens the Configuration File page for
saving the ini file to a folder on a computer (see 'Backing Up and
Loading Configuration File' on page 503).
 Reset: opens the Maintenance Actions page for resetting the
device (see 'Resetting the Device' on page 479).
 Software Upgrade Wizard: starts the Software Upgrade wizard
for upgrading the device's software (see 'Software Upgrade
Wizard' on page 500).
Home
Opens the Home page (see 'Using the Home Page' on page 59).
Help
Opens the Online Help topic of the currently opened configuration
page (see 'Getting Help' on page 57).
Log off
Logs off a session with the Web interface (see 'Logging Off the Web
Interface' on page 58).
Note: If you modify parameters that take effect only after a device reset, after you
click the Submit button, the toolbar displays "Reset" (in red color), as shown
in the figure below. This is a reminder that you need to later save your
settings to flash memory and reset the device.
Figure 3-3: "Reset" Displayed on Toolbar