Version 6.4 411 March 2012
SIP User's Manual 20. Configuring the IP Media Parameters
20 Configuring the IP Media Parameters
The IP Media Settings page allows you to configure IP media parameters. For a description
of these parameters, see 'Configuration Parameters Reference' on page 541.
Note: This page is applicable only to Mediant 1000. This page appears only if your
device is installed with the relevant Software Upgrade Key (see 'Loading
Software Upgrade Key' on page 497).
To configure the IP media parameters:
1. Open the IP Media Settings page (Configuration tab > VoIP menu > IP Media
submenu > IP Media Settings).
Figure 20-1: IP Media Settings Page
2. Configure the parameters as required.
3. Click Submit to apply your changes.
4. To save the changes to flash memory, see 'Saving Configuration' on page 482.
20.1 Overview
This section provides information on the device's media server capabilities:
Multi-party conferencing (see 'Conference Server' on page 412)
Playing and recording Announcements (see 'Announcement Server' on page 426)
IP-to-IP Transcoding (see 'IP-to-IP Transcoding' on page 474)
Voice XML Interpreter (see Voice XML Interpreter on page 450)
Note: This section is applicable only to Mediant 1000.
To Next Page
Loading...
