AudioCodes Mediant 600 - 17 SIP Definitions; Configuring SIP General Parameters

Version 6.4 223 March 2012
SIP User's Manual 17. SIP Definitions
17 SIP Definitions
This section describes configuration of SIP parameters.
17.1 Configuring SIP General Parameters
The SIP General Parameters page is used to configure general SIP parameters. For a
description of the parameters appearing on this page, see 'Configuration Parameters
Reference' on page 541.
 To configure general SIP parameters:
1. Open the SIP General Parameters page (Configuration tab > VoIP menu > SIP
Definitions submenu > General Parameters).
2. Configure the parameters as required.