SIP User's Manual 74 Document #: LTRT-83310
Mediant 600 & Mediant 1000
4.1 Configuring Telnet and SSH Settings
The Telnet/SSH Settings page is used to define Telnet and Secure Shell (SSH). For a
description of these parameters, see 'Web and Telnet Parameters' on page 554.
To define Telnet and SSH:
1. Open the Telnet/SSH Settings page (Configuration tab > System menu >
Management submenu > Telnet/SSH Settings).
2. Configure the parameters as required.
3. Click Submit to apply your changes.
4. To save the changes to flash memory, see 'Saving Configuration' on page 482.
To Next Page
Loading...
