AudioCodes Mediant 600 - 29 Reporting Information to External Party; Generating Call Detail Records; CDR Fields for Gateway Application

Version 6.4 525 March 2012
SIP User's Manual 29. Reporting Information to External Party
29 Reporting Information to External Party
29.1 Generating Call Detail Records
The Call Detail Record (CDR) contains vital statistic information on calls made from the
device. CDRs are generated at the end and optionally, at the beginning of each call
(defined by the CDRReportLevel parameter). Once generated, they are sent to a Syslog
server. The destination IP address for CDR logs is defined by the CDRSyslogServerIP
parameter. For CDR in RADIUS format, see 'Supported RADIUS Attributes' on page 529.
29.1.1 CDR Fields for Gateway Application
The CDR fields for the Gateway (and IP-to-IP) applications are listed in the table below.
Table 29-1: CDR Fields for Gateway/IP2IP Application
Field Name Description
ReportType
Report type (call started, call connected, or call released)
Cid
Port number
SessionId
SIP session identifier
Trunk
Physical trunk number
BChan
Selected B-channel
ConId
SIP conference ID
TG
Trunk Group ID
EPTyp
Endpoint type (FXS or FXO)
Orig
Call originator ("LCL" for Tel side; "RMT" for IP side)
SourceIp
Source IP address
DestIp
Destination IP address
TON
Source phone number type
NPI
Source phone number plan
SrcPhoneNum
Source phone number
SrcNumBeforeMap
Source number before manipulation
TON
Destination phone number type
NPI
Destination phone number plan
DstPhoneNum
Destination phone number
DstNumBeforeMap
Destination number before manipulation
Durat
Call duration
Coder
Selected coder
Intrv
Packet interval
RtpIp
RTP IP address
Port
Remote RTP port