Version 6.4 483 March 2012
SIP User's Manual 23. Software Upgrade
23 Software Upgrade
The Software Update menu allows you to upgrade the device's software, install Software
Upgrade Key, and load/save configuration file. This menu includes the following page
items:
Load Auxiliary Files (see 'Loading Auxiliary Files' on page 483)
Software Upgrade Key (see 'Loading Software Upgrade Key' on page 497)
Software Upgrade Wizard (see 'Software Upgrade Wizard' on page 500)
Configuration File (see 'Backing Up and Loading Configuration File' on page 503)
23.1 Loading Auxiliary Files
Auxiliary files provide the device with additional configuration settings such as call progress
tones and prerecorded tones. The table below lists the different types of Auxiliary files:
Table 23-1: Auxiliary Files
File Description
INI
Provisions the device’s parameters. The Web interface enables practically full
device provisioning, but customers may occasionally require new feature
configuration parameters in which case this file is loaded.
Note: Loading this file only provisions those parameters that are included in the
ini file. For more information on the ini file, see 'INI File-Based Management' on
page 83.
CAS
CAS auxiliary files containing the CAS Protocol definitions that are used for CAS-
terminated trunks (for various types of CAS signaling). You can use the supplied
files or construct your own files. Up to eight different CAS files can be loaded to
the device.
For more information on CAS files, see CAS Files on page 492.
Voice Prompts
Voice announcement file containing a set of Voice Prompts (VP) that are played
by the device during operation. For more information on VP files, see Voice
Prompts File on page 491.
Note: This file is applicable only to Mediant 1000.
Call Progress
Tones
This is a region-specific, telephone exchange-dependent file that contains the
Call Progress Tones (CPT) levels and frequencies for the device. The default
CPT file is U.S.A. For more information on the CPT file, see 'Call Progress Tones
File' on page 486.
Prerecorded
Tones
The Prerecorded Tones (PRT) file enhances the device's capabilities of playing a
wide range of telephone exchange tones that cannot be defined in the CPT file.
For more information on the PRT file, see 'Prerecorded Tones File' on page 491.
Dial Plan
This file contains dialing plans, used by the device, for example, to know when to
stop collecting the dialed digits and start sending them on. For more information
on the Dial Plan file, see Dial Plan File on page 492.
VXML
Voice Extensible Markup Language (VXML) script file. For more information on
VXML, see Voice XML Interpreter on page 450.
To Next Page
Loading...
