AudioCodes Mediant 600 - E Selected Technical Specifications; Mediant 600

Version 6.4 839 March 2012
SIP User's Manual E. Selected Technical Specifications
E Selected Technical Specifications
E.1 Mediant 600
The table below lists the main technical specifications of the Mediant 600.
Table E-1: Mediant 600 Functional Specifications
Function Specification
Interfaces
E1/T1/J1
1, 2 or fractional (15 DS0) span spans using RJ-48c connectors
BRI S/T
4 or 8 ports (8/16 calls) using RJ-45 connectors
Analog
4 FXS ports using RJ-11 connectors
Ethernet
Dual Redundant Ethernet 10/100Base-TX Ethernet ports via 2 RJ-45
connectors
RS-232
RS-232 for configuration and troubleshooting
Media Processing
Voice Coders
G.711, G.722, G.723.1, G.729A/B, G.726, GSM FR, MS GSM, iLBC,
EVRC, QCELP, AMR, GSM EFR.
Independent dynamic vocoder selection per channel, VAD, CNG.
Echo Cancellation
G.165 and G.168-2002, with 32, 64 or 128 tail length.
QoS
802.1p/Q VLAN tagging, DiffServ, voice quality monitoring, RTCP-XR
DTMF/MF Transport Packet side or PSTN side detection and
generation, RFC 2833 compliant
DTMF relay, Call Progress tone detection and generation
IP Transport, VoIP (RTP/RTCP) per IETF RFC 3550 and 3551.
Fax and Modem Transport
T.38 compliant (real time fax), Automatic bypass to PCM or ADPCM.
Signaling
E1/T1 CAS
E&M, Loop Start, Feature Group-D, E911CAMA, R2 MFC, numerous
protocol and country variants
ISDN PRI
ETSI/EURO, ANSI NI2, DMS-100, 5ESS, VN3, VN4, VN6 QSIG
(Basic Call and Supplementary Services) and other variants
Control & Management
Control Protocols
SIP
Operations & Management
AudioCodes Element Management System
Embedded HTTP Web Server
Telnet
SNMP V2/V3
Remote configuration and
software download
TFTP, HTTP, HTTPS, DHCP and BootP, RADIUS, Syslog (for
events, alarms and CDRs)