SIP User's Manual 40 Document #: LTRT-83310
Mediant 600 & Mediant 1000
3.1.6 Working with Configuration Pages
The configuration pages contain the parameters for configuring the device and are
displayed in the Work pane, located to the right of the Navigation pane.
3.1.6.1 Accessing Pages
The configuration pages are accessed by clicking the required page item in the Navigation
tree.
To open a configuration page:
1. On the Navigation bar, click the required tab:
• Configuration
• Maintenance
• Status & Diagnostics
The menus pertaining to the selected tab appear in the Navigation tree.
2. In the Navigation tree, drill-down to the required submenu and then click the required
page item; the page opens in the Work pane.
You can also access previously opened pages by clicking the Web browser's Back button
until you have reached the required page. This is useful if you want to view pages in which
you have performed configurations in the current Web session.
Notes:
• You can also access certain pages from the Device Actions button
located on the toolbar (see 'Toolbar Description' on page 36).
• To view all the menus in the Navigation tree, ensure that the Navigation
tree is in Full view (see 'Displaying Navigation Tree in Basic and Full
View' on page 38).
• To get Online Help for the currently displayed page, see 'Getting Help' on
page 57.
• Certain pages may not be accessible or may be read-only if your Web
user account's access level is low (see 'Configuring the Web User
Accounts' on page 66). If a page is read-only, 'Read-Only Mode' is
displayed at the bottom of the page.
3.1.6.2 Viewing Parameters
For convenience, some pages allow you to view a reduced or expanded display of
parameters. The Web interface provides two methods for displaying page parameters:
Displaying "basic" and "advanced" parameters - see 'Displaying Basic and Advanced
Parameters' on page 41
Displaying parameter groups - see 'Showing / Hiding Parameter Groups' on page 42
To Next Page
Loading...
