Version 6.4 289 March 2012
SIP User's Manual 18. GW and IP to IP
Note: You can also configure the Forward on Busy Trunk Destination table using
the ini file parameter table ForwardOnBusyTrunkDest.
To configure Forward on Busy Trunk Destination rules:
1. Open the Forward on Busy Trunk Destination page (Configuration tab > VoIP menu
> GW and IP to IP submenu > Routing submenu > Forward on Busy Trunk).
Figure 18-15: Forward on Busy Trunk Destination Page
The figure above displays a configuration that forwards IP-to-Tel calls destined for
Trunk Group ID 1 to destination IP address 10.13.5.67 if the conditions mentioned
earlier exist.
2. Configure the table as required, and then click Submit to apply your changes.
Save the changes to the device's flash memory with a device reset (see ''Saving
Configuration'' on page 482).
To Next Page
Loading...
