SIP User's Manual 294 Document #: LTRT-83310
Mediant 600 & Mediant 1000
The device also supports "double call hold" for FXS interfaces where the called party,
which has been placed on-hold by the calling party, can then place the calling party on hold
as well and make a call to another destination. The flowchart below provides an example of
this type of call hold:
Figure 18-16: Double Hold SIP Call Flow
The flowchart above describes the following "double" call-hold scenario:
1. A calls B and establishes a voice path.
2. A places B on hold; A hears a Dial tone and B hears a Held tone.
To Next Page
Loading...
