SIP User's Manual 372 Document #: LTRT-83310
Mediant 600 & Mediant 1000
e. Contact User = name that is sent in the SIP Request Contact header for this IP
Group (e.g., ITSP-B).
Figure 18-55: Defining IP Group 2
4. Define IP Group #3 for the IP-PBX:
a. From the 'Type' drop-down list, select SERVER.
b. In the 'Description' field, type an arbitrary name for the IP Group (e.g., IP-PBX).
c. From the 'Proxy Set ID' drop-down lists, select 3 (represents the IP address,
configured in , for communicating with this IP Group).
d. In the 'SIP Group Name' field, enter the host name that is sent in SIP Request
From\To headers for this IP Group (e.g., IPPBX).
e. Contact User = name that is sent in the SIP Request Contact header for this IP
Group (e.g., PBXUSER).
Figure 18-56: Defining IP Group 3
To Next Page
Loading...
