Version 6.4 375 March 2012
SIP User's Manual 18. GW and IP to IP
c. Click Submit.
Figure 18-59: Defining Coder Group ID 1
3. Configure Coder Group ID #2 for the ITSP's (as shown in the figure below):
a. From the 'Coder Group ID' drop-down list, select 2.
b. From the 'Coder Name' drop-down list, select G.723.1.
c. Click Submit.
Figure 18-60: Defining Coder Group ID 2
4. Open the IP Profile Settings page (Configuration tab > VoIP menu > Coders And
Profiles submenu > IP Profile Settings).
5. Configure Profile ID #1 for the IP-PBX (as shown below):
a. From the 'Profile ID' drop-down list, select 1.
b. From the 'Coder Group' drop-down list, select Coder Group 1.
To Next Page
Loading...
