AudioCodes Mediant 600 - Page 399

Version 6.4 399 March 2012
SIP User's Manual 19. Stand-Alone Survivability (SAS) Application
Parameter Description
URI (either source or destination) to the rule configured in the row
above (defined by the parameter ManipulatedURI).
Manipulation Purpose
[ManipulationPurpose]
Defines the purpose of the manipulation:
 [0] Normal = Inbound manipulations affect the routing input and
source and/or destination number (default).
 [1] Routing input only = Inbound manipulations affect the routing
input only, retaining the original source and destination number.
 [2] Shared Line = Used for the Shared-Line Appearance feature.
This manipulation is for registration requests to change the
destination number of the secondary extension numbers to the
primary extension.
Source IP Group
[SrcIpGroup]
Defines the IP Group from where the incoming INVITE is received. For
any Source IP Group, enter the value -1.
Source Username Prefix
[SrcUsernamePrefix]
Defines the prefix of the source SIP URI user name (usually in the
From header). For any prefix, enter the asterisk "*" symbol (default).
Note: The prefix can be a single digit or a range of digits. For available
notations, see ''Dialing Plan Notation for Routing and Manipulation'' on
page 787.
Source Host
[SrcHost]
Defines the source SIP URI host name - full name (usually in the From
header). For any host name, enter the asterisk "*" symbol (default).
Destination Username
Prefix
[DestUsernamePrefix]
Defines the prefix of the destination SIP URI user name (usually in the
Request-URI). For any prefix, enter the asterisk "*" symbol (default).
Note: The prefix can be a single digit or a range of digits. For available
notations, see ''Dialing Plan Notation for Routing and Manipulation'' on
page 787.
Destination Host
[DestHost]
Defines the destination SIP URI host name - full name (usually in the
Request URI). For any host name, enter the asterisk "*" symbol
(default).
Request Type
[RequestType]
Defines the SIP request type to which the manipulation rule is applied.
 [0] All = all SIP messages (default)
 [1] INVITE = all SIP messages except REGISTER and
SUBSCRIBE
 [2] REGISTER = only SIP REGISTER messages
 [3] SUBSCRIBE = only SIP SUBSCRIBE messages
 [4] INVITE and REGISTER = all SIP messages except
SUBSCRIBE
 [5] INVITE and SUBSCRIBE = all SIP messages except
REGISTER
Manipulated URI
[ManipulatedURI]
Determines whether the source or destination SIP URI user part is
manipulated.
 [0] Source = Manipulation is done on the source SIP URI user part.
(default)
 [1] Destination = Manipulation is done on the destination SIP URI
user part.
Operation Manipulation Rule (when match occurs in characteristics)
Remove From Left
[RemoveFromLeft]
Defines the number of digits to remove from the left of the user name
prefix. For example, if you enter 3 and the user name is "john", the new
user name is "n".