SIP User's Manual 504 Document #: LTRT-83310
Mediant 600 & Mediant 1000
To load the ini file:
1. Click the Browse button, navigate to the folder in which the ini file is located, select
the file, and then click Open; the name and path of the file appear in the field beside
the Browse button.
2. Click the Load INI File button, and then at the prompt, click OK; the device uploads
the ini file and then resets (from the cmp version stored on the flash memory). Once
complete, the Login screen appears, requesting you to enter your user name and
password.
To Next Page
Loading...
