AudioCodes Mediant 600 - Page 587

Version 6.4 587 March 2012
SIP User's Manual A. Configuration Parameters Reference
Parameter Description

[2] Full = Caches all challenges from the proxies.
Note: Challenge Caching is used with all proxies and not only with the
active one.
Proxy IP Table
Web: Proxy IP Table
EMS: Proxy IP
[ProxyIP]
This parameter table configures the Proxy Set table with Proxy Set IDs,
each with up to five Proxy server IP addresses (or fully qualified domain
name/FQDN). Each Proxy Set can be defined with a transport type
(UDP, TCP, or TLS). The format of this parameter is as follows:
[ProxyIP]
FORMAT ProxyIp_Index = ProxyIp_IpAddress, ProxyIp_TransportType,
ProxyIp_ProxySetId;
[\ProxyIP]
For example:
ProxyIp 0 = 10.33.37.77, -1, 0;
ProxyIp 1 = 10.8.8.10, 0, 2;
ProxyIp 2 = 10.5.6.7, -1, 1;
Notes:
 This parameter can include up to 32 indices (0-31).
 To assign various attributes (such as Proxy Load Balancing) per
Proxy Set ID, use the parameter ProxySet.
 For configuring the Proxy Set ID table using the Web interface and
for a detailed description of the parameters of this ini file table, see
'Configuring Proxy Sets Table' on page 200.
 For configuring ini file table parameters, see 'Configuring ini File
Table Parameters' on page 84.
Proxy Set Table
Web: Proxy Set Table
EMS: Proxy Set
[ProxySet]
This parameter table configures the Proxy Set ID table. It is used in
conjunction with the ProxyIP ini file table parameter, which defines the
IP addresses per Proxy Set ID.
The ProxySet ini file table parameter defines additional attributes per
Proxy Set ID. This includes, for example, Proxy keep-alive and load
balancing and redundancy mechanisms (if a Proxy Set contains more
than one proxy address).
The format of this parameter is as follows:
[ProxySet]
FORMAT ProxySet_Index = ProxySet_EnableProxyKeepAlive,
ProxySet_ProxyKeepAliveTime, ProxySet_ProxyLoadBalancingMethod,
ProxySet_IsProxyHotSwap, ProxySet_SRD,
ProxySet_ClassificationInput, ProxySet_ProxyRedundancyMode;
[\ProxySet]
For example:
ProxySet 0 = 0, 60, 0, 0, 0, , 1;
ProxySet 1 = 1, 60, 1, 0, 1, , 0;
Notes:
 This table parameter can include up to 32 indices (0-31).
 For configuring the Proxy Set IDs and their IP addresses, use the
parameter ProxyIP.
 The parameter ProxySet_ClassificationInput is not applicable.
 For configuring the Proxy Set ID table using the Web interface and
for a detailed description of the parameters of this ini file table, see