Version 6.4 623 March 2012
SIP User's Manual A. Configuration Parameters Reference
Parameter Description
IP Profile Table
Web: IP Profile
Settings
EMS: Protocol
Definition > IP
Profile
[IPProfile]
This parameter table configures the IP Profile table. Each IP Profile ID
includes a set of parameters (which are typically configured separately using
their individual "global" parameters). You can later assign these IP Profiles to
outbound IP routing rules (Prefix parameter), inbound IP routing rules
(PSTNPrefix parameter), and IP Groups (IPGroup parameter).
The format of this parameter is as follows:
[IPProfile]
FORMAT IpProfile_Index = IpProfile_ProfileName, IpProfile_IpPreference,
IpProfile_CodersGroupID, IpProfile_IsFaxUsed, IpProfile_JitterBufMinDelay,
IpProfile_JitterBufOptFactor, IpProfile_IPDiffServ, IpProfile_SigIPDiffServ,
IpProfile_SCE, IpProfile_RTPRedundancyDepth,
IpProfile_RemoteBaseUDPPort, IpProfile_CNGmode,
IpProfile_VxxTransportType, IpProfile_NSEMode, IpProfile_IsDTMFUsed,
IpProfile_PlayRBTone2IP, IpProfile_EnableEarlyMedia,
IpProfile_ProgressIndicator2IP, IpProfile_EnableEchoCanceller,
IpProfile_CopyDest2RedirectNumber, IpProfile_MediaSecurityBehaviour,
IpProfile_CallLimit, IpProfile_DisconnectOnBrokenConnection,
IpProfile_FirstTxDtmfOption, IpProfile_SecondTxDtmfOption,
IpProfile_RxDTMFOption, IpProfile_EnableHold, IpProfile_InputGain,
IpProfile_VoiceVolume, IpProfile_AddIEInSetup,
IpProfile_SBCExtensionCodersGroupID, IpProfile_MediaIPVersionPreference,
IpProfile_TranscodingMode, IpProfile_SBCAllowedCodersGroupID,
IpProfile_SBCAllowedCodersMode, IpProfile_SBCMediaSecurityBehaviour,
IpProfile_SBCRFC2833Behavior, IpProfile_SBCAlternativeDTMFMethod,
IpProfile_SBCAssertIdentity, IpProfile_AMDSensitivityParameterSuit,
IpProfile_AMDSensitivityLevel, IpProfile_AMDMaxGreetingTime,
IpProfile_AMDMaxPostSilenceGreetingTime, IpProfile_SBCDiversionMode,
IpProfile_SBCHistoryInfoMode, IpProfile_EnableQSIGTunneling,
IpProfile_SBCFaxCodersGroupID, IpProfile_SBCFaxBehavior,
IpProfile_SBCFaxOfferMode, IpProfile_SBCFaxAnswerMode;
[\IPProfile]
For example:
IPProfile 1 = ITSP, 1, 0, 0, 10, 10, 46, 40, 0, 0, 0, 0, 2, 0, 0, 0, 0, -1, 1, 0, 0, -1,
1, 4, -1, 1, 1, 0, 0, , -1, 0, 0, -1, 0, 0, 0, 0, -1, 0, 8, 300, 400, -1, -1;
Notes:
You can configure up to nine IP Profiles (i.e., indices 1 through 9).
To use the settings of the corresponding "global" parameter, enter the
value -1 (or in the Web interface, the option 'Not Configured').
For a detailed description of each parameter, see its corresponding global
parameter:
IPProfile Field Web Name Global Parameter
IpProfile_Index
Profile ID -
IpProfile_ProfileNam
e
Profile Name -
IpProfile_IpPreferen
ce
Profile Preference -
IpProfile_CodersGro
upID
Coder Group CodersGroup
To Next Page
Loading...
