SIP User's Manual 68 Document #: LTRT-83310
Mediant 600 & Mediant 1000
4. To change the password of an account, perform the following:
a. In the field 'Current Password', enter the current password.
b. In the fields 'New Password' and 'Confirm New Password', enter the new
password (maximum of 19 case-sensitive characters).
c. Click Change Password; if you are currently logged into the Web interface with
this account, the 'Enter Network Password' dialog box appears, requesting you to
enter the new password.
5. To prevent user access after a specific number of failed logins, do the following:
a. From the 'Deny Access On Fail Count' drop-down list, select the number of failed
logins after which the user is prevented access to the device for a user-defined
time (see next step).
b. In the 'Deny Authentication Timer' field, enter the interval (in seconds) that the
user needs to wait before a new login attempt from the same IP address can be
done after reaching the number of failed login attempts (defined in the previous
step).
6. To display user login information upon a successful login, from the 'Display Login
Information' drop-down list, select Yes. After you login, the following window is
displayed:
Figure 3-39: Login Information Window
7. Click Submit to apply your changes.
To Next Page
Loading...
