Version 6.4 97 March 2012
SIP User's Manual 9. Date and Time
3. Configure daylight saving, if required:
• 'Day Light Saving Time' (DayLightSavingTimeEnable) - enables daylight saving
time
• 'Start Time' (DayLightSavingTimeStart) and 'End Time' (DayLightSavingTimeEnd)
- defines the period for which daylight saving time is relevant.
• 'Offset' (DayLightSavingTimeOffset) - defines the offset in minutes to add to the
time for daylight saving. For example, if your region has daylight saving of one
hour, the time received from the NTP server is 11:00, and the UTC offset for your
region is +2 (i.e., 13:00), you need to enter "60" to change the local time to 14:00.
4. Verify that the device is set to the correct date and time. You can do this by viewing
the date and time in the Regional Settings page, as described in 'Configuring Date and
Time' on page 95.
To Next Page
Loading...
