98 ST80 Masterview Operation and Setup
Timer Alarm
The timer alarm is a low-priority local “alarm clock”. For details on
how to set this alarm, please refer to the Timers section in the
Operation chapter.
D2687-1
Clear alarms.
masterview
ALARM
CLOCK
✕✕✕
✕
✕
Man Overboard (MOB)
The MOB alarm is activated when a MOB condition exists as a
result of operation of the MOB keypad or receipt of waypoint 999.
When a MOB alarm is active, the MOB page is displayed until the
alarm is cancelled. You can press the chapter key to display other
data as normal, however, the two right hand keys display the ‘MOB’
icons which can be pressed to return to the MOB screen.
Note: Each Masterview can be configured to ignore MOB alarms by
switching off the MOB alarm in the ‘Specific Alarm’ list in Setup.
Dead Reckoned MOB Data (Default)
D2688-1
Press this key momentarily
to display Lat/Lon based on
MOB data.
Press for 1 second to select
illumination adjustment.
masterview
MOB DR
078o
TRUE
1.2
NM
08:30 ELAPSED