ST80 Masterview Operation and Setup 67
• Speed (SPD)
• Velocity made good to waypoint (VMG)
• Speed over ground (SOG)
• Distance to waypoint (DTW)
• Estimated time to arrival (ETA)
• Heading (HDG)
• Course over ground (COG)
• Bearing to waypoint (BTW)
• Course to steer (CTS)
Cross Track Error (XTE)
Cross track error is displayed in Statute Miles, Nautical Miles or
Kilometres, depending on the units selected in User Setup.
D2274-1
Go to the next chapter or
press for 1 second to enter
illumination adjustment.
Go to the next page or
press for 1 second to return
to the previous page.
masterview
Display cross track error
tramline graphic.
0.1
NM
XTRACK ERROR
As with the navigate page, a direction-to-steer indicator shows the
direction to steer to return to the correct track.
To Next Page
Loading...
