106 ST80 Masterview Operation and Setup
VMG Trend Indicators
The VMG trend indicators are adjusted in exactly the same manner as
the speed trend indicators.
Speed Display Format
The format can be set to display the boat speed in one (X.X) or two
(X.XX) decimal places.
D2200-1
Advance to next chapter or
press for 1 second to enter
illumination adjustment.
Next page or press for 1
second to return to previous
page.
Select alternative display
format.
Turn highlighted format off.
Turn highlighted format on.
Distance Display Format
The format for distance is set in exactly the same way as the speed
format.
Speed Transducer Calibration
The speed transducer must be calibrated to ensure correct speed and log
values are displayed. There are three ways in which you can do this:
• Auto: Automatically record the correction factor after making 2 or
more runs between the two charted objects.
• Manual: Manually key-in a correction factor. This is calculated after
making two or more runs between two charted objects approximately
1NM apart (the average after 2 or more runs must be between 0.00 and
2.55).
• GPS: Match your actual speed with the speed over ground (SOG)
sourced from GPS.
To Next Page
Loading...
