68 ST80 Masterview Operation and Setup
Course Deviation Indicator (CDI)
The CDI displays a graphic representation of your vessel relative to
the current destination waypoint.
• Bearing to waypoint and distance to waypoint data is permanently
displayed together with a boat symbol.
• The position of the boat is proportional to the cross track error value.
D2630-1
Go to the next chapter or
press for 1 second to enter
illumination adjustment.
Go to the next page or
press for 1 second to return
to the previous page.
masterview
XTE 1.05 NM
Select the auto steer
display.
Cycle the top line options.
BTW
102oM
DTW
100.2
Additional information (cross track error being the default) is
displayed at the top of the screen. This can be changed to any one of
the following:
• Speed (SPD)
• Velocity made good to waypoint (VMG)
• Speed over ground (SOG)
• Distance to waypoint (DTW)
• Estimated time of arrival (ETA)
• Heading (HDG)
• Course over ground (COG)
• Waypoint number
• Course to steer (CTS)
To Next Page
Loading...
Need help?
General
